The stability of a door is only as solid as the quality of hinge pins used to secure the hinges (which holds the door) in place. In order for the entire frame/hinge/door system to even function, hinge pins are slid through the brackets to connect both sides of a hinge. If your hinge pins are of poor quality, it’s possible for them to break, leaving the door completely unsecured. Furthermore, if a hinge pin isn’t true, you will have trouble installing or even using the hinge.

Why Weld On Hinges Are So PopularWhen shopping for hinges, you may discover that some of them don’t have precut holes for bolts or screws. Most hinges, of course, have holes for fasteners. You can install them on surfaces by driving a screw or bolt through the hinge’s hole and into the surface. Some

What Is Bullet Hinges What Are Bullet Hinges?Also referred to as weld on hinges, lift off hinges, and barrel hinges, bullet hinges provide users an attractive yet compact and strong method to attach metal doors with metal frames. These hinges come in quite handy for enclosures, gates, tool cabinets,

At RF, we offer a large selection of industrial T-hinges. Our T-hinges are highly durable and functional and work with a variety of doors. T-hinges, called such because of their “T” shape, are incredibly simple to install because they are mounted flush. When mounting, the longer section should be mounted to the door, while the shorter side should be mounted to the door frame.

How to Install Gate HingesPosition the top hinge against the gate temporarily to locate the best location for a solid installation. Mark the hinge location with a grease pencil. Depending on the type of hinge you choose, you can install it on the exterior of the fence or the interior of the gate. Po

How To Maintain Your Driveway Gate Hinges While driveway gates don't need much in the way of maintenance, they do require occasional care to keep them operating at their best. If driveway gates and their operating gear are neglected, then operational problems are likely to occur and could cause the

Strap hinges are surface-mounted hinges with a relatively short barrel, and having one or two leaves, or straps, which extend longer than the barrel is high. This type of hinge is designed to support wide or heavy doors, and it is quite robust, due to both the design and the thickness of the material.

What Is The Bullet Hinge Solution Do You Need?RF carries a variety of weldable hinges, including flat hinges, barrel hinges, adjustable hinges, round hinges, flag hinges, winged hinges and our most popular weld on bullet hinges. These hinges are good for welding on metal doors and lids when fastener

How to Remove a Stuck Door Hinge Pin?Removing a door from its jamb might seem like a simple task; all you need is to pull the hinge pin and lift off the door slightly to do the job. However, the reality might be a bit different if you recently painted the door hinges, are living in an old house, or

What Is Weld On Hinge A weld-on hinge is mounted with a weld instead of fasteners, making it extremely strong and able to support a lot of weight. These hinges are useful on thick metal surfaces where it may be impractical to drill and tap holes, and they offer better alignment, while preventing giv